Motion Drives for all Advertising Displays at the P.O.S.
Turntables for presentations and trade shows, mains and battery powered display motors, electric motors, gear motors for displays and industrial applications.
Mains operated
Turntable EDB with 3 revolving platforms
Turntable with 3 turning plates rotating in counter direction (3-tier-turntable). The plates are made of 16mm MDF coated with Nextel anthracite or RAL-black matt varnished.
Recommended to use in shop windows and for decoration purposes.
Data
- Max. centrical load: 5 kg each platform
- Turn plate: Ø 600 / Ø 400 / Ø 200 mm
- Total height of turntable: 260 mm including lamp holder
- Power cord: 2 m
- Dead weight: ca. 8 kg
- Rotating speed: 2.5 rpm
- Rotation direction: counter rotating
- Housing: plastic, white, steel base, platforms MDF
- Operating voltage: 220 – 240 volt
- Power consumption: 4 W (without lamp)
- Special Features:
- Safety clutch
- Counter rotating 3-tier-platform
- Lighting with hollow shaft and lamp holder E 14
- Options
- Rotating speed: 1 rpm
- Operating voltage: 115 volt
- Country specific plug
Rotating Display Turntable S 080
Mains powered plastic turntable, ball bearing, safety clutch. Turntable for shop window decoration purposes, as display turntable or driving unit for colums, cubes, models, products, etc.
Data
- Max. centrical load: 5 kg
- Turn plate: Ø 150 mm
- Total height of turntable: 65 mm
- Power cord: 2 m
- Dead weight: ca. 0.5 kg
- Rotating speed: 2.0 rpm
- Rotation direction: clockwise (cw)
- Housing: plastic, white
- Operating voltage: 220 – 240 volt
- Power consumption: 4 W
- Special Features:
- Safety clutch
- Options
- Rotating speed: 4 rpm
- Rotation direction: counterclockwise (ccw)
- Operating voltage: 115 volt
- Country specific plug
Rotating Display Turntable S 080 S (with hollow tube)
Mains powered turntable in white plastic with big ball bearing and safety clutch. Display turntable with extremely low noise. Fixed hollow tube with cable for installation of different lamp holders and lamps. Turntable is especially applicable for rotating illuminated displays.
Data
- Max. centrical load: 5 kg
- Turn plate Ø 150 mm
- Total height of turntable: 65 mm (without tube)
- Power cord: 2 m
- Dead weight: ca. 0.5 kg
- Rotating speed: 2 rpm
- Rotation direction: clockwise (cw)
- Housing: plastic, white
- Operating voltage: 220 – 240 volt
- Power consumption: 4 W (lamp max. 60 W)
- Special Features:
- Safety clutch
- Hollow shaft with tube
- Options
- Rotation speed: 4 rpm
- Rotation direction: counterclockwise (ccw)
- Operating voltage: 115 volt
- Country specific plug
- Lamp holders for different lamps
- Choice of different tube length
Rotating Display Turntable S 050, S 050 H and PD 100 (Poster Turner)
- S 050 with hollow shaft
- S 050 with cable leaving hollow shaft
- S 050 with hollow shaft, tube and cable leaving (different length available)
- S 050 poster turner 3 x DIN A4 format
- Several lamps and holders for tubes
Data
- Max. centrical load: 5 kg
- Turn plate: Ø 124 mm
- Total height of turntable: 75 mm (without optional tube)
- Power cord: 2 m
- Dead weight: ca. 1 kg
- Rotating speed: 1.7 rpm
- Rotation direction: clockwise (cw)
- Housing: plastic, white, steel base
- Operating voltage: 220 – 240 volt
- Power consumption: 4 W (lamp max 60 W)
- Special Features:
- Safety clutch
- Hollow shaft with tube
- Options
- Rotation speed: different on request
- Rotation direction: counterclockwise (ccw)
- Operating voltage: 115 volt
- Country specific plug
- Lamp holders for different lamps
- Length of tube on request
- Turn plate: Ø 225 mm
- Poster frame for 3 x DIN A4 or DIN A3
- Counter rotating support
Revolving Turntable SWD 100, exhibition turntable
- SWD 100, white coated
- SWD 100 zink coated with slipring
Revolving turntable also available as hanging unit for 5 kg load. Rotating motor usable for lots of areas of application for example shop windows, exhibitions, decoration purposes, etc.
Data
- Max. centrical load: 10 kg
- Turn plate: Ø 124 mm
- Total height of turntable: 75 mm
- Power cord: 2 m
- Dead weight: ca. 1 kg
- Rotating speed: 2.5 rpm
- Rotation direction: clockwise (cw)
- Housing: diecast metal zinc
- Operating voltage: 220 – 240 volt
- Power consumption: 4 W
- Special Features:
- Safety clutch
- Double supported by ball bearings
- 5 kg hanging load ceiling mounted
- Options
- Rotating speed: different on request
- Rotation direction: counterclockwise (ccw)
- Housing: diecast metal zinc, white coated
- Turn plate Ø 225 mm
- Operating voltage: 115 volt
- Country specific plug
- Collecting ring with power cable for 900 / 4 A
- Second power cord for separate power supply of collecting ring
- Hanging operation with special shaft and shackle
Hanger rotator SWD 200 H Hanging turntable unit
Universally applicable ceiling mounted drive with security function by using ball bearing supported shaft. Optional rotating power supply (collecting ring) for revolving platform available. Ceiling motor also available with white coated housing. For safe and long term operation.
Data
- Max. hanging load: 20 kg
- Turn plate: hanging shaft with shackle
- Total height of turntable: 87 mm (without shackel)
- Power cord: 2 m
- Dead weight: ca. 1,1 kg
- Rotating speed: 2.5 rpm
- Rotation direction: counter clockwise (ccw)
- Housing: diecast metal zinc
- Operating voltage: 220 – 240 volt
- Power consumption: 4 W
- Special Features:
- Safety clutch
- Double supported by ball bearings
- Options
- Rotating speed: different on request
- Rotation direction: clockwise (cw)
- Operating voltage: 115 volt
- Country specific plug
- Housing: diecast metal zinc, white coated
- Collecting ring with power cable for 900 / 4 A
- Second power cord for separate power supply of collecting ring
Revolving Turntable SW 250, exhibition turntable
Rotating platform also available with hollow shaft, tube and lampholder (E14 or E27) for illumination and outcoming cables or slip ring. Universally applicable as exhibition turntable, display turntable or decoration turntable.
Data
- Max. centrical load: 25 kg
- Turn plate: Ø 225 mm
- Total height of turntable: 100 mm (without optional tube)
- Power cord: 2 m
- Dead weight: ca. 2.4 kg
- Rotating speed: 2.5 rpm
- Rotation direction: clockwise (cw)
- Housing: plastic, white, steel base
- Operating voltage: 220 – 240 volt
- Power consumption: 4 W
- Special Features:
- Safety clutch
- Options
- Rotation Speed: different on request
- Rotation direction: counterclockwise (ccw)
- Operating voltage: 115 volt
- Country specific plug
- Hollow shaft with tube and lamp holder for different lamps (max. 60 W)
- Tube length on request
- Outcomming cable (without tube) ca. 200 mm
- Collecting ring with power cable for 900 W / 4 A
Display Turntable SW 500, exhibition turntable
Display turntable also available with collecting ring for illumination. Massive bottom plate with bore holes. Shaft with 3 ball bearings for high bending power. Universally applicable as exhibition turntable, illuminated cubes, as hanging turntable and and rotating signs.
Data
- Max. centrical load: 50 kg
- Turn plate: Ø 225 mm
- Total height of turntable: 100 mm
- Power cord: 2 m
- Dead weight: ca. 4 kg
- Rotating speed: 2.5 rpm
- Rotation direction: clockwise (cw)
- Housing: plastic, white, steel base 3 mm
- Operating voltage: 220 – 240 volt
- Power consumption: 5.5 W
- Special Features:
- Safety clutch
- Multiple shaft supported by ball bearings
- 25 kg hanging load ceiling mounted
- 10 kg wall mounted
- Options
- Rotation Speed: different on request
- Rotation direction: counterclockwise (ccw)
- Operating voltage: 115 volt
- Country specific plug
- Collecting ring with power cable for 900 W / 4 A
- Second power cord for separate power supply of collecting ring
- Switch for changing rotation direction
- Special functions like reversing operation, cycle operation, stop times on request
Turntable for Exhibitions SW 1000/2000/3000
Exhibition turntable also available with collecting ring for illumination (4 A / 900 W). There are stronger turntable versions available for 200 kg = SW 2000 and 300 kg = SW 3000.
Turntable available as Super Silent version with 1.4 rpm!
Data
- Max. centrical load: 100 / 200 / 300 kg
- Turn plate: Ø 400 mm
- Total height of turntable: 110 mm
- Power cord: 2 m
- Dead weight: ca. 17 kg
- Rotating speed: 2.5 rpm
- Rotation direction: clockwise (cw)
- Housing: plastic, white, steel base 4 mm
- Operating voltage: 220 – 240 volt
- Power consumption: 17 W
- Special Features:
- Safety clutch
- Multiple supported shaft by ball bearings
- 50 kg hanging load ceiling mounted
- 50 kg wall mounted
- Speed regulation by Frequency Inverter from - 40 to + 40 % (not Super Silent version)
- Options
- Rotation Speed: 0.8 rpm
- Rotation direction: counterclockwise (ccw)
- Operating voltage: 115 volt
- Country specific plug
- Collecting ring with power cable for 900 W / 4 A
- Second power cord for separate power supply of collecting ring
- Options Super Silent version:
- Extremly low noise motor (15 W)
- Rotating speed: 1.4 rpm
- Rotation direction: counterclockwise (ccw)
- Switch for changing rotation direction
- Special functions like reversing operation, cycle operation, stop times on request
Turntable for Exhibitions U 5000 and NEW U 7500
For indoor and outdoor use. Exhibition turntable available with collecting ring for illumination (4 or 8 A / 900 or 1800 W).
Special Features:
Data
- Max. centrical load: 500 kg / 750 kg
- Turn plate: Ø 400 mm
- Total height of turntable: 125 mm
- Power cord: 2 m
- Dead weight: ca. 22 kg
- Rotating speed: 1 rpm
- Rotation direction: clockwise (cw)
- Housing: metal zinc coated, steel base 6 mm
- Operating voltage: 220 – 240 volt
- Power consumption: 15 W
- Special Features:
- Safety clutch
- Multiple supported by ball bearings
- 500 kg hanging load ceiling mounted
- 150 kg wall mounted
- Hollow shaft with Ø 42 mm
- Motor with extremely low noise
- Options
- Outdooor operations
- Rotation direction: counterclockwise (ccw)
- Operating voltage: 115 volt
- Country specific plug
- Collecting ring with power cable for 900 or 1800 W / 4 or 8 A
- Second power cord for separate power supply of collecting ring
- Switch for changing rotation direction
- Special functions like reversing operation, cycle operation, stop times on request
- Upgrade by safety kit for up to 500 kg hanging load ceiling mounted
Available as rental tunrtable.
U 5000 and U 7500 Safety Package for Ceiling Mounted Operation, exhibition turntable
Ceiling mounted turntable with safety equipment. Applicable for indoor and outdoor especially as exhibition turntable. Revolving plate also available as a collector ring version for illumination. Approved for trade show installations.
Special Features:
- Torsion free
- Very silent
- Suited for both indoor and outdoor operation
- Maintenance-free
Exebition turntable especially approved!
Data
- Max. centrical hanging load: up to 500 kg
- Turn plate Ø 400 mm
- Total height of turntable with safety kit 1: 140 mm
- Total height of turntable with safety kit 2: 175 mm
- Power cord: 2 m
- Dead weight: ca. 30 / 46 kg
- Rotating speed: 1 rpm
- Rotation direction: clockwise (cw)
- Housing: metal zinc coated, steel base 6 mm
- Operating voltage: 220 – 240 volt
- Power consumption: 15 W
- Special Features:
- Safety clutch
- Multiple supported by ball bearings
- Motor with extremely low noise
- Options
- Outdooor operations
- Rotation direction: counterclockwise (ccw)
- Operating voltage: 115 volt
- Country specific plug
- Collecting ring with power cable for 900 or 1800 W / 4 or 8 A
- Second power cord for separate power supply of collecting ring
- Switch for changing rotation direction
- Special functions like reversing operation, cycle operation, stop times on request
Available as rental tunrtable (including safety kit).
Build In Turntable for Exhibitions K5000 and K7500
Build in turntable with a very compact construction. For indoor use. Outdoor operation optionally possible. This turntable is also available with collecting ring for illumination.
Special Features:
- Torsion free
- Very silent
- Maintenance-free
- K 7500 with stronger shaft and ball bearings, especially applicable for trade shows, indoor advertising signs and logos.
Data
- Max. centrical load: 500 kg / 750 kg
- Turn plate: Ø 220 mm
- Total height of turntable: 132 mm
- Base: DIN A4 format
- Power cord: 2 m
- Dead weight: ca. 16 kg
- Rotating speed: 1 rpm
- Rotation direction: clockwise (cw)
- Housing: none, steel base 10 mm
- Operating voltage: 220 – 240 volt
- Power consumption: 15 W
- Special Features:
- Safety clutch
- Multiple supported by ball bearings
- 500 kg hanging load ceiling mounted
- 150 kg wall mounted
- Hollow shaft with Ø 42 mm
- Motor with extremely low noise
- Options
- Rotation direction: counterclockwise (ccw)
- Operating voltage: 115 volt
- Country specific plug
- Collecting ring with power cable for 900 or 1800 W / 4 or 8 A
- Second power cord for separate power supply of collecting ring
- Switch for changing rotation direction
- Special functions like reversing operation, cycle operation, stop times on request
FU - Speed Regulation for Turntables
Speed regulator easy to install and to use by plug-and-socket connection.
Applicable for all turntables with asynchronous motors up to 2.2 kw power. Therefore several turntables could be connected simultaneously.
Data
Frequency Inverter FU for turntables:
- Digital display with integrated control panel
- Speed regulation from - 40 to + 40 % of the standard speed
- Dimensions: h 142, w 72, d 101 mm
- Dead weight: 0.7 kg / 1.55 lbs
- Power Cord: 2 meter with protective earth conductor
- Connection cable to tunrtable: ca. 20 cm
- Operating Voltage: 220-240 V
- Overheating and overvoltage protection
- Options
- Country specific plug
- Operating Voltage: 115 V
