Motion Drives for all Advertising Displays at the P.O.S.
Turntables for presentations and trade shows, mains and battery powered display motors, electric motors, gear motors for displays and industrial applications.
Heavy Duty Turntables
Heavy Duty Turntable STO 1
Heavy duty turntable for maximum centrical load of 1000 kg. Strong welded construction. Big rotary joint for large installations. Only for horizontal use. Indoor and outdoor operation. Especially applicable for trade shows, indoor / outdoor advertising signs and logos.
Data
- Max. centrical load: 1000 kg
- Turn plate Ø 760 mm
- Base plate: Ø 850 mm
- Total height of turntable: 193 mm
- Power cord: 1.4 m
- Dead weight: ca. 101 kg
- Rotating speed: 0.8 rpm
- Rotation direction: clockwise (cw)
- Housing: none, steel base 6 mm
- Operating voltage: 220 – 240 volt
- Power consumption: 66 W
- Special Features:
- Safety clutch
- Belt drive adjustable
- Speed regulation possible by Frequency Inverter
- Collecting ring with power cable for up to16 A
- Options
- Outdooor operations
- Rotation direction: counterclockwise (ccw)
- Second power cord for separate power supply of collecting ring
- Switch for changing rotation direction
- Special functions like reversing operation, cycle operation, stop times on request
Characteristics
Heavy Duty Turntable STO 2
Heavy duty turntable for maximum centric load of 2,000 kg (4,400 LBS). Rotating drive with particularly compact design. An extremely low maintenance profile is achieved by usage of a long life slide bearing. Depending on the requirements, different drive motors are available. The very high tilting moment allows a centered bearing even of large turn plates. By this the utilization is even possible without supportive wheels or rings.
The turntables are suitable for inside and outside use. They are especially suitable as rotation drives for logos and illuminated advertising signs outdoor or indoor, as exhibition turntables and for studio- or stage areas.
Data
- Dynamic torque up to 3 kNm
- Static holding torque up to 5 kNm
- High tilting momentum up to 3 kNm
- Max. centric axial load 20 kN (2,000 kg / 4,400 LBS)
- Stable construction, die cast housing or milled aluminum (depending on mounting from)
- Anchoring possible on a foundation
- Suitable for heavy superstructures
- Rotating drive for oversized requirements
- Insulation type IP 65
- Selectable motor versions 12 or 24 DV 230V/50 Hz 400V/50 Hz
- Optional stepless speed selection 0.02 to 15 rpm (optional by frequency converter)
- Optional angular measurement, absolute value or incremental
- Optional collection ring
- Delivery with or without connection flange
- Maintenance free bearing
- Proper weight approx. 15 kg / 33 LBS (excluding drive motor)
- Dimensions: total height: 110 mm, max. diameter: 227.5 mm
- Temperature range from -40° to +60° C
Lubrication interval of worm gear 24 months.
Heavy Duty Turntable STO 14
Heavy duty turntable for maximum centric load of 14,000 kg (30,000 LBS). Rotating drive with particularly compact design. An extremely low maintenance profile is achieved by usage of a long life slide bearing. Depending on the requirements, different drive motors are available. The very high tilting moment allows a centered bearing even of large turn plates. By this the utilization is even possible without supportive wheels or rings.
The turntables are suitable for inside and outside use. They are especially suitable as rotation drives for rotating objects on roofs, on masts, on pylons with very high wind load. You can use them for big logos and illuminated advertising signs outdoor or indoor, as exhibition turntables and for studio or stage areas.
Data
- Dynamic torque up to 12 kNm
- Static holding torque up to 20 kNm
- High tilting momentum up to 75 kNm
- Max. centric axial load 140 kN (14,000 kg / 30,000 LBS)
- Stable construction, die cast housing or milled aluminum (depending on mounting from)
- Anchoring possible on a foundation
- Suitable for heavy superstructures
- Rotating drive for oversized requirements
- Insulation type IP 65
- Selectable motor versions 12 or 24 DV 230V/50 Hz 400V/50 Hz
- Optional stepless speed selection 0.02 to 15 rpm (optional by frequency converter)
- Optional angular measurement, absolute value or incremental
- Optional collection ring
- Delivery with or without connection flange
- Maintenance free bearing
- Proper weight approx. 200 kg / 440 LBS (excluding drive motor)
- Dimensions: total height: 257.5 mm, max. diameter: approx. 560 mm
- Temperature range from -40° to +60° C
Lubrication interval of worm gear 24 months.
Applications:
- Physical performance test of banding force with t-beam and draw winch.
- Outdoor long-term test (rain, snow and ice)
- Performance test with solar panel 60m² surface
